Mar 11 2008

java mail smtp simple auth

Category: 技术ssmax @ 22:23:21

今天写个后台发送,连到smtp要登录的,我见java mail里面api默认就可以在connect的时候输入密码,以为直接用就可以啦,谁知道sun 的smtp实现default不打开auth,google一下,记录一些文档。。。还搜到某个猪头说session参数就只有一开始那几个,其实可以有很多很多的。。。

明天回去还要加上 msg.saveChanges();  不知道有啥用。。。

好像是保存message状态和header的,The send method calls the saveChanges method on the message before sending it.  看来不用改了。。。

Package com.sun.mail.smtp Description

An SMTP protocol provider for the JavaMail API that provides access to an SMTP server. Refer to RFC 821 for more information.

When sending a message, detailed information on each address that fails is available in an SMTPAddressFailedException chained off the top level SendFailedException that is thrown. In addition, if the mail.smtp.reportsuccess property is set, an SMTPAddressSucceededException will be included in the list for each address that is successful. Note that this will cause a top level SendFailedException to be thrown even though the send was successful.

The SMTP provider also supports ESMTP (RFC 1651). It can optionally use SMTP Authentication (RFC 2554) using the LOGIN, PLAIN, and DIGEST-MD5 mechanisms (RFC 2592 and RFC 2831).

To use SMTP authentication you’ll need to set the mail.smtp.auth property (see below) and provide the SMTP Transport with a username and password when connecting to the SMTP server. You can do this using one of the following approaches:

  • Provide an Authenticator object when creating your mail Session and provide the username and password information during the Authenticator callback.Note that the mail.smtp.user property can be set to provide a default username for the callback, but the password will still need to be supplied explicitly.This approach allows you to use the static Transport send method to send messages.
  • Call the Transport connect method explicitly with username and password arguments.This approach requires you to explicitly manage a Transport object and use the Transport sendMessage method to send the message. The demo program demonstrates how to manage a Transport object. The following is roughly equivalent to the static Transport send method, but supplies the needed username and password:

Transport tr = session.getTransport(“smtp”);

tr.connect(smtphost, username, password);

msg.saveChanges(); // don’t forget this

tr.sendMessage(msg, msg.getAllRecipients());


When using DIGEST-MD5 authentication, you’ll also need to supply an appropriate realm; your mail server administrator can supply this information. You can set this using the mail.smtp.sasl.realm property, or the setSASLRealm method on SMTPTransport.

SMTP can also optionally request Delivery Status Notifications (RFC 1891). The delivery status will typically be reported using a “multipart/report” (RFC 1892) message type with a “message/delivery-status” (RFC 1894) part. JavaMail does not currently provide direct support for these new MIME types, but you can process them as any other “multipart” or “message” content, using MimeMultipart and MimeMessage objects.

See below for the properties to enable these features.

Note also that THERE IS NOT SUFFICIENT DOCUMENTATION HERE TO USE THESE FEATURES!!! You will need to read the appropriate RFCs mentioned above to understand what these features do and how to use them. Don’t just start setting properties and then complain to us when it doesn’t work like you expect it to work. READ THE RFCs FIRST!!!

The SMTP protocol provider supports the following properties, which may be set in the JavaMail Session object. The properties are always set as strings; the Type column describes how the string is interpreted. For example, use

        props.put("mail.smtp.port", "888");

to set the mail.smtp.port property, which is of type int.

Name Type Description
mail.smtp.user String Default user name for SMTP. String The SMTP server to connect to.
mail.smtp.port int The SMTP server port to connect to, if the connect() method doesn’t explicitly specify one. Defaults to 25.
mail.smtp.connectiontimeout int Socket connection timeout value in milliseconds. Default is infinite timeout.
mail.smtp.timeout int Socket I/O timeout value in milliseconds. Default is infinite timeout.
mail.smtp.from String Email address to use for SMTP MAIL command. This sets the envelope return address. Defaults to msg.getFrom() or InternetAddress.getLocalAddress(). NOTE: mail.smtp.user was previously used for this.
mail.smtp.localhost String Local host name used in the SMTP HELO or EHLO command. Defaults to InetAddress.getLocalHost().getHostName(). Should not normally need to be set if your JDK and your name service are configured properly.
mail.smtp.localaddress String Local address (host name) to bind to when creating the SMTP socket. Defaults to the address picked by the Socket class. Should not normally need to be set, but useful with multi-homed hosts where it’s important to pick a particular local address to bind to.
mail.smtp.localport int Local port number to bind to when creating the SMTP socket. Defaults to the port number picked by the Socket class.
mail.smtp.ehlo boolean If false, do not attempt to sign on with the EHLO command. Defaults to true. Normally failure of the EHLO command will fallback to the HELO command; this property exists only for servers that don’t fail EHLO properly or don’t implement EHLO properly.
mail.smtp.auth boolean If true, attempt to authenticate the user using the AUTH command. Defaults to false.
mail.smtp.submitter String The submitter to use in the AUTH tag in the MAIL FROM command. Typically used by a mail relay to pass along information about the original submitter of the message. See also the setSubmitter method of SMTPMessage. Mail clients typically do not use this.
mail.smtp.dsn.notify String The NOTIFY option to the RCPT command. Either NEVER, or some combination of SUCCESS, FAILURE, and DELAY (separated by commas).
mail.smtp.dsn.ret String The RET option to the MAIL command. Either FULL or HDRS.
mail.smtp.allow8bitmime boolean If set to true, and the server supports the 8BITMIME extension, text parts of messages that use the “quoted-printable” or “base64” encodings are converted to use “8bit” encoding if they follow the RFC2045 rules for 8bit text.
mail.smtp.sendpartial boolean If set to true, and a message has some valid and some invalid addresses, send the message anyway, reporting the partial failure with a SendFailedException. If set to false (the default), the message is not sent to any of the recipients if there is an invalid recipient address.
mail.smtp.sasl.realm String The realm to use with DIGEST-MD5 authentication.
mail.smtp.quitwait boolean If set to false, the QUIT command is sent and the connection is immediately closed. If set to true (the default), causes the transport to wait for the response to the QUIT command.
mail.smtp.reportsuccess boolean If set to true, causes the transport to include an SMTPAddressSucceededException for each address that is successful. Note also that this will cause a SendFailedException to be thrown from the sendMessage method of SMTPTransport even if all addresses were correct and the message was sent successfully.
mail.smtp.socketFactory.class String If set, specifies the name of a class that implements the interface. This class will be used to create SMTP sockets.
mail.smtp.socketFactory.fallback boolean If set to true, failure to create a socket using the specified socket factory class will cause the socket to be created using the class. Defaults to true.
mail.smtp.socketFactory.port int Specifies the port to connect to when using the specified socket factory. If not set, the default port will be used.
mail.smtp.mailextension String Extension string to append to the MAIL command. The extension string can be used to specify standard SMTP service extensions as well as vendor-specific extensions. Typically the application should use the SMTPTransport method supportsExtension to verify that the server supports the desired service extension. See RFC 1869 and other RFCs that define specific extensions.
mail.smtp.starttls.enable boolean If true, enables the use of the STARTTLS command (if supported by the server) to switch the connection to a TLS-protected connection before issuing any login commands. Note that an appropriate trust store must configured so that the client will trust the server’s certificate. Defaults to false.
mail.smtp.userset boolean If set to true, use the RSET command instead of the NOOP command in the isConnected method. In some cases sendmail will respond slowly after many NOOP commands; use of RSET avoids this sendmail issue. Defaults to false.
mail.smtp.ssl.protocols string Specifies the SSL protocols that will be enabled for SSL connections. The property value is a whitespace separated list of tokens acceptable to the method.
mail.smtp.ssl.ciphersuites string Specifies the SSL cipher suites that will be enabled for SSL connections. The property value is a whitespace separated list of tokens acceptable to the method.

In general, applications should not need to use the classes in this package directly. Instead, they should use the APIs defined by javax.mail package (and subpackages). Applications should never construct instances of SMTPTransport directly. Instead, they should use the Session method getTransport to acquire an appropriate Transport object.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.